• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • CAS No.: 38245000
  • Other Names: 0
  • MF: 0
  • EINECS No.: 38245000
  • Place of Origin: Guangdong, China (Mainland)
  • Classification: Other Adhesives
  • Main Raw Material: cement based polymer mortar
  • Usage: Construction
  • Brand Name: yunyan
  • Model Number: YY-312
  • Type: Polymer Cement Grout
  • Application: Outdoor and indoor tile or mosaic grout filler
  • Color: Customized Color
  • Component: 1 Component
  • Material: High grade cement ,silicone sand and polymer

Packaging & Delivery

Packaging Details 20kg or 25kg/bag
Delivery Time Shipped in 7 days after payment

CG1 Coarse coloured tile grout



CG1 colored tile grout is prefabricated, only mix with water. It is a high performance, fast setting grout that provides a grout joint that is dense and hard.




1. Good Strength, Non-shrinkage, incrust, never depart


2. Anti crack, anti penetration, anti mildew


3. Anit-UV, Anti-aging, long last color, Environment friendly, non-toxic, anti-mould


4. Coloured, many colour can be chose.


5. Reduce the sag which has bad incluence on the decorativeness.




Suitable for the joint filling of tile layed on both on wall and floor for interior and exterior wall. 




Tile joint: make sure that the joint clean, free of crumb or water. For porous tile such as clay tile, art tile. wet the joint 





1.Uut the powder together with clean water into a big bucket and mix well. powder : clean water = 10kgs : 2kgs. 

   Mix with electric mix until the slurry is enven. Reduce or increase water according to actual situation.


2. Fill the slurry into the joint with knife. Do not leave hollow.


3.Clean the surface with cloth wet with clean water. For those coarse tile surface which are difficult to clean, 

   use ceramic tile detergent.




1. The working and construction temperature should be 5 -40 oC. No rain fall.


2. For those ceramic tile with coarse surface, prior filling test is needed to avoid unthorough cleaning after application. 

    Apply craft of seam treatment if necessary.


3. The mixed adhesive should be used up within 3~4 hours. The skin layer should be removed before use. Never mix 

    again with water and use again without removal.


4. Keep from rain or touch within 3 hours after laying.




The amount needed according to the width, deepth and the sizes of ceramic tile, which can be calculated according to 

the following (kg/sqm)

          2.0x(tile length + tile width)×joint width×joint depth

G=           tile length x tile width


Marks: length unit is mm

Usage depend on tile size,thinkness and joint seam.




12 months from the date of manufacture stored in a dry place in original un-opened bag.

25 kgs/bag or 2kgs/box



Abrasion Resistance/mm3

< 2000

Shrinkage/ mm/m

< 3.0

Modulus of Rupture/Mpa

> 2.5

Compressive Strength/Mpa

> 15

Water Absorption(g) 30 minutes

< 5.0






Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland)
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $34,000
Learn More